AQUATRAN ® Model 3
Highest Sensitivity for the Most Demanding Applications
The AQUATRAN 3 analyzer is the industries most trusted WVTR instrument for high to ultrahigh-level barriers because it can measure each molecule of water vapor entering the sensor. The analyzer is easy to use and offer the lowest detection levels available in the market. It features 2 independent cells with changeable horizontal test cartridges that allow a wide variety of sample sizes and types to be easily and accurately tested.
The AQUATRAN 3 analyzer is the industries most trusted WVTR instrument for high to ultrahigh-level barriers because it can measure each molecule of water vapor entering the sensor. The analyzer is easy to use and offer the lowest detection levels available in the market. It features 2 independent cells with changeable horizontal test cartridges that allow a wide variety of sample sizes and types to be easily and accurately tested.
Highest Accuracy and Repeatability
- Patented AQUATRACE® sensor is the most trusted absolute Coulometric sensor on market that never need calibration
- Ultra-Low detection level down to 0.00005 g/(m2*day)
- Fully automated temperature, flow and RH controls simplify testing and provide unparalleled repeatability
- TruSeal gas flushed perimeter sealing system reduces potential environmental water vapor ingress providing accurate results
Demanding Applications
- OLED flexible displays and electronics applications that require ultra-high barriers to moisture
- High moisture barrier packages for Pharmaceutical industry
The AQUATRAN 3 analyzer can test the Water Vapor Transmission Rate (WVTR) on both films and packages from high to ultra-high barriers. It uses the MOCON’s patented long life AQUATRACE WVTR sensor which has a linear output throughout the entire measurable range. This guarantees highly accurate and repeatable results throughout it’s a wide detection range from 0.00005 to 5 g/(m2*day).
The upper detection limit can be extended with the use the reduced area film test cartridge (factor x9), or various size masking.
The analyzer has industry leading features such as removable and interchangeable horizontal test cartridges, easy to use touch screen operator interface, and fully automated testing providing higher throughput in the lab.
For more than 15 years, MOCON’s AQUATRAN series have been the most trusted and longest lasting on the market. For complex multi-layered high barriers or sensitive electronics and panels, the AQUATRAN 3 is the right choice for advanced WVTR testing.
Removable Cartridges
- Easy sample prep on the benchtop
- One button release and loading
- Pneumatic clamping provides more repeatable results
- Interchangeable cartridge options extend the range and flexibility of the analyzer without tools while maintaining arcuate results
- Cartridge options include: Reduced area to extend testing range without masks, improved accuracy testing of paper-based barriers, adaptors for remote testing of packages or extreme conditions, and custom designs for unique testing requirements.
TruSeal®
- Eliminate Individual Zero
- Reduced testing time (increase throughput)
- More repeatable results
Automated Control Features
- Flow, Temp, & RH control
- Test Process Development and Recommendations
- Programmable Test Sequencing
- Test report printing and export
- Sensor Protection
Touchscreen Interface
- Intuitive automated operation requires less training
- Built in multi-level user management and data security
- Event log & trouble shooting guide
- Save on valuable lab space by eliminating need for PC
AQUATRACE Sensor
- Ultra-low level of detection down to 5 x 10 -5 g/(m2*day)
- Longer sensor life than others on the market
- Accurate and repeatable results
- Most trusted P2O5 sensor that fully complies with ASTM F3299 and ISO 15106-3
Warranty
- Full 100% parts and workmanship warranty for 12 months
Capabilities
| Units | AQUATRAN 3 Analyzer | |
| Test Range, Film, Std 50 cm2 sample | mg/(m2 • day) | 0.05 to 5000 |
| mg/100in2 • day) | 0.0032 to 322.6 | |
| Test Range, Package | mg/(pkg • day) | 0.00025 to 25 |
| Resolution, Film | mg/(m2 • day) | 0.01 |
| mg/(100in2 • day) | 0.00065 | |
| Resolution, Package | mg/(pkg • day) | 0.00005 |
| Repeatability, Film | mg/(m2 • day) | ±0.050 |
| mg/(100in2 • day) | ±0.0032 or 1% of value, whichever is greater | |
| Repeatability, Package | mg/(pkg • day) | 0.00025 or 1% of value, whichever is greater |
| Temperature Control Range | °C | 5°C to 50°C ± 0.2°C at 100% RH |
| °C |
10°C to 40°C ± 0.2°C at 5 to 90% RH
|
|
| Humidity Control, Cell, Test Gas | % RH |
100% and 5% to 90% RH ± 3 RH
|
| Film Size | N/A | 4” x 4” std, 2”x 2” optional |
| Film Thickness | N/A | Up to 120 mil |
| Film Test Area | N/A | 50 cm2 std., option to 5.6 cm2 |
| Carrier Gas | N/A | Nitrogen |
Physical Specifications
- 15.5” H x 12” W x 23” D (39.4 cm x 30.4 cm x 58.0 cm)
- 95 Lbs. (43.1 kg)
Electrical Requirements
- Voltage: 100 – 240 VAC 50/60 Hz
- Maximum Power Draw: 700 VA
Laboratory Requirements
| Temperature | Operation | 22 °C ± 2 °C |
| Storage | 10 °C to 30 °C | |
| Humidity | Operation | 20% to 80% RH (non-condensing) |
| Storage | 5% to 85% RH (non-condensing) |
Gas Supply Requirements
| Carrier Gas | Gas Composition | Nitrogen (99.9999% N2 or better) |
| Supply Pressure, Nominal | 29 PSI, (2.0 Bar), (200 kPa) |
Connectivity
- Remote Access and Control (requires optional Perm-Net Light software)
- Standard Ethernet port (100T)
- Dual USB 2.0 ports (for connection of keyboard, mouse or memory devices)
Compliance Standards
This product is UL and CSA listed using the ETL mark from Intertek Group plc. and is certified to conform to CE.
Conforms to the following internationally recognized safety standards.
- IEC 61010-1:2010 Third Edition
- UL 61010-1:2012 Third Edition
- CAN/CSA-C22.2 No. 61010-1:2012 Third Edition
Conforms to the following internationally recognized EMC standards.
- EN 61326-1:2013
- EN 61000-3-2:2006, A1:2009, A2:2009
- EN 61000-3-3:2013
Conforms to EU Directive 2011/65/EU RoHS Compliance.
Cartridges & Options
- Reduced area cartridge
- Custom Engineered Test Cartridges
- Package Testing Adaptor
Consumables
- Cert Films 2-4,
- Masks
Software
- PermWare data collection, data management and instrument status dashboard
- Remote viewing software from a PC – PermNet Lite
- 21 CFR Part 11 user and data security
Service & Support Options
- IQ/OQ documentation & validation
- Basic Preventative Maintenance Plan
- Plus Preventative Maintenance Plan
Packaging Films
- Monolayer
- Multi-layer
- Coated Films
- Coated Paper/paperboard
Specialty Films
- Solar back sheets
Packages
- Medical packages
- Bottles/Closures
Encapsulation
- Solar panels
- Windows
- OLED devises
- Other Electrical applications
Blisters
- Medical
- Optical
Seals
- O-Rings
- Gaskets
Test Standard Compliance
to
, JIS K7129-3
ISO 15106-3
GB/T 21529-2008
Test Methodology
Following ASTM F3299-18;
Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using and Electrolytic Detection Sensor (Coulometric P2O5 Sensor)
Summary of Test Method
1. A dry chamber is separated from a wet chamber of known temperature and humidity by the barrier material to be tested. The dry chamber and the wet chamber make up a test cell in which the test film is sealed. Water vapor permeating through the film mixes with the dry carrier gas in the dry chamber and is carried to an electrolytic sensor. The carrier gas is passed through the sensor where water vapor it holds is absorbed by the phosphorous pentoxide (P2O5). Direct current, applied to the electrodes of the sensor, dissociates the water into hydrogen and oxygen. Two electrons are required to electrolyze each water molecule, and the current in the cell represents the number of molecules dissociated per unit time.
DATA SHEET
RDM TEST BROCHURE
MEDESEAL BROCHURE