Gradient Heat Sealer for rapid determination of heat sealability. Produces 3 or 5 independently temperature controlled seals, up to 15mm wide x 30mm long.
The HT-1XS Hot Tack Tester measures the strength of hot seals enabling selection and compliance testing of flexible materials for packaging applications to ASTM F1921.
The Low Pressure Heat Sealer HL-5 allows you to determine the sealability of coated paper, aluminium foils and laminates as well as other heat-sealable films.
Touchscreen Precision Seal Strength / Tensile / Compression Tester for determining the strength of packaging materials including plastics, paper and board.
For production of high quality heat seals and/or precise measurement of heat sealability of flexible packaging. Produces seals up to 300mm long x 5 to 25mm wide.
The LCT combines three tests in one instrument – crease strength, box forming force and spring-back with optional friction testing for the ultimate carton analysis.
The BLT-P uses positive pressure via a needle / tube inserted into a pack meeting ASTM F2096. Convenient, easy to use and quick to test single or multiple packs.
The Check-A-Pack 200 benchtop tester for Measurement of micro leak hole size and burst pressure seal integrity for all flexible and semi-rigid packaging.
The Check-A-Pack 600 is a benchtop automatic tester for measurement of micro leak hole size and burst pressure seal integrity for all flexible and semi-rigid packaging.
The FD-1709 Impact Tester determines the impact resistance of plastic film using a free-falling dart. Performs to International Test Standards ASTM D1709, and ISO 7765.
The CF-200i Inclined Plane Co-efficient of Friction Tester determines the static friction properties of plastic films, foils, laminates, papers and boards.
Designed for plastic sheets, films, glasses, LCD panel, touch screen and other transparent and semi-transparent materials haze and transmittance measurement.
Designed for plastic sheets, films, glasses, LCD panel, touch screen and other transparent and semi-transparent materials haze and transmittance measurement.
Puncture resistance is a useful characteristic to determine the performance of a thin film, particularly when sharp or pointed items are likely to pierce the films of packaging.
The world’s most advanced Oxygen permeation measurement system. Fully automatic testing, fast set-up, faster results, no Oxygen sensor calibration needed.
The industries most trusted WVTR instrument for high to ultrahigh-level barriers because it can measure each molecule of water vapor entering the sensor.
The Digital Ink Rub Tester is designed to measure scuffing or rubbing resistance. Several tests can be performed including Wet/Dry Rub, Bleed and Hot abrasions tests.
The TMI 13-56 Burst Tester has been designed for burst and leak testing on Flexible Packaging, such as paper, foils, paper boards, corrugated board, textiles etc.
The Crush Test is designed as a robust, easy to-use instrument. Suitable for a wide variety of samples, including corrugated board, tubes, paper and plastics.
The TMI 33-29 Beating and Freeness Tester is designed to determine the rate of drainage of a dilute pulp suspension and express it in terms of the Schopper Riegler (SR) value.
The TMI 58-05 Smoothness Tester is a microprocessor-controlled instrument for the determination of smoothness of paper and board according to the Bekk Method.
The TMI 58-06 is designed to accurately measure the surface roughness of sheet materials under conditions similar to those experienced during the printing process.
Cobb sizing testers provide a simple, standardized method for fast determination of the quantity of water absorbed by a paper or board in a given time.
The 71-01 Chip Class™ is designed as a trouble-free chip classification system. Carefully selected components give you the most reliable chip classification system available.
Available in either 61 cm (24 inch) or 91.4 cm (36 inch) sizes, the Messmer Buchel Speed Dryers permit rapid drying of hand-sheets after pressing, prior to evaluation.
The TMI 75-08 is a temperature-controlled board tester that simulates the corrugating process of a medium. Its compact, vertical design minimizes bench space.
The TMI 17-77 meets international standards and corporate testing methods for compression strength requirements for a variety of materials and products.
The Internal Bond Tester is designed to determine the internal bond strength of a variety of Paper and Board materials according to TAPPI T 569 and ISO 16260.
If you need to accurately measure the crease and board stiffness of a range of paper based samples, the Crease and Board 79-15 wraps up all of your requirements.
The Lab Master® Release and Adhesion testing system operates with Windows®-based software, and features the ability to create user-defined test set-up.
Measure thickness of sheet materials, to meet any ISO, ASTM or other International specifications for paper, corrugated, plastics, plastic film, tissue paper and more.
The 6MPCA is the most advanced digital model offered within the Ray-Ran range of melt flow index testers. Simple to operate using on-board microprocessor technology.
Messmer Büchel 17-36 Short Span Compression Tester
The Short Span Compression Tester is an advanced microprocessor-controlled instrument for determining the compression strength of fluting medium or test liner.
Automated tear tester with optical encoder for measuring the angular position of the pendulum during tearing and converting the measurement to tear units.
Tensile testing is the most widely used method for indicating the serviceability of many materials including Paper, Board, Tissue Paper and Non-wovens.
AELP pallet beams provide an affordable solution to weigh oversized or bulky items. The GK indicator has a full numerioc keypad for easy entering of checkweighing limits