The Digital Ink Rub Tester is designed to measure scuffing or rubbing resistance. Several tests can be performed including Wet/Dry Rub, Bleed and Hot abrasions tests.

The TMI 13-56 Burst Tester has been designed for burst and leak testing on Flexible Packaging, such as paper, foils, paper boards, corrugated board, textiles etc.

The Short Span Compression Tester is an advanced microprocessor-controlled instrument for determining the compression strength of fluting medium or test liner.

The Crush Test is designed as a robust, easy to-use instrument. Suitable for a wide variety of samples, including corrugated board, tubes, paper and plastics.

The TMI 33-29 Beating and Freeness Tester is designed to determine the rate of drainage of a dilute pulp suspension and express it in terms of the Schopper Riegler (SR) value.

The TMI 58-05 Smoothness Tester is a microprocessor-controlled instrument for the determination of smoothness of paper and board according to the Bekk Method.

The TMI 58-06 is designed to accurately measure the surface roughness of sheet materials under conditions similar to those experienced during the printing process.

The TMI 58-17 is a microprocessor-controlled instrument for measuring the roughness and air permeance of paper and board using the Bendtsen method.

Cobb sizing testers provide a simple, standardized method for fast determination of the quantity of water absorbed by a paper or board in a given time.

The 71-01 Chip Class™ is designed as a trouble-free chip classification system. Carefully selected components give you the most reliable chip classification system available.

The TMI 72-15  self-contained laboratory PFI pulp beater tests to a widely accepted method of simulating commercial refining practices.

The TMI 73-18 works to separate interlaced fibres one another via room temperature mechanical treatment per ISO 5263 and TAPPI T 205.

With the TMI 73-19 Hot Disintegrator, pulp shows complete development of strength properties without further treatment. Tests to TAPPI T262 standards.

The TMI 73-50 Standard Hand Sheet Press is designed for ease of operation and accuracy in forming handsheets in accordance with TAPPI standards.

The TMI 75-08 is a temperature-controlled board tester that simulates the corrugating process of a medium. Its compact, vertical design minimizes bench space.

If you need to accurately measure the crease and board stiffness of a range of paper based samples, the Crease and Board 79-15 wraps up all of your requirements.

The TMI 79-56 bending test machine is designed to work out the bending resistance of paper, paperboard, plastic film, medical tubing, and wire.

The Internal Bond Tester is designed to determine the internal bond strength of a variety of Paper and Board materials according to TAPPI T 569 and ISO 16260

The TMI 17-77 meets international standards and corporate testing methods for compression strength requirements for a variety of materials and products.

The Lab Master® Release and Adhesion testing system operates with Windows®-based software, and features the ability to create user-defined test set-up.