Strip Cutter 15mm or 25mm for HT-2PC
Strip Cutter for preparing long strips of samples, 15mm or 25mm wide, for Hot Tack and other testing.
The HT-2PC Strip Cutter has been specifically designed for cutting very long strips of material like that use on the RDM HT-2PC Hot Tack Tester but can be equally used for preparing the strip samples for normal heat sealing and strength testing applications.
The cutter has two blades mounted to a separate holder and therefore can be replaced easily when blunt. The blade holder is mounted onto a draw down carriage which is guided and running on two rails, this ensures parallel running and precise cutting.
A film clamp holds the film tightly to assist in the cutting of the material.
The blade block is set to cut either 15mm or 25mm wide samples, please specify the width required when ordering, other non-standard widths can be made to order.
With this system if the sample you are cutting is overlapped several times then a very long sample can be cut up to 10 meters in length.
Removable Cartridges
- Easy sample prep on the benchtop
- One button release and loading
- Pneumatic clamping provides more repeatable results
- Interchangeable cartridge options extend the range and flexibility of the analyzer without tools while maintaining arcuate results
- Cartridge options include: Reduced area to extend testing range without masks, improved accuracy testing of coated paper-based barriers, adaptors for remote testing of packages or extreme conditions, and custom designs for unique testing requirements.
TruSeal®
- Gas flush of sample mounting seal protects chamber integrity
- Lowers background level reducing need to run individual zero
- Shortened testing time increases throughput
- More repeatable results
Control Features
- Fully automated flow, temp, & RH control throughout tests
- Automatic test method development and recommendations
- Programmable multi-test sequencing
- Final test report printing and export
- Built-in sensor protection
Touchscreen Interface
- Intuitive automated operation requires less training
- Built in multi-level user management and data security
- Event log & trouble shooting guide
- Save on valuable lab space by eliminating need for PC
Accurate Sensors
- 2/12 R model has wide range sensor providing reliable, repeatable results
- 2/12 T model has a unique high range Coulox sensor for high transmitter barriers
Warranty
- Full 100% parts and workmanship warranty for 12 months
Capabilities – Model-Specific
| Units | R Model | T Model | |
| Test Ranges (50 cm^2 @100%O2) | cc/(m2 × day) | 0.05 to 28,800 | 200 to 65,000 |
| cc/(100 in2 × day) | 0.003 to 1858 | 12.9 to 4200 | |
| Test Ranges (5.6 cm^2) @100%O2 | cc/(m2 × day) | 0.44 to 255,300 | 1770 to 576,200 |
| cc/(100 in2 × day) | 0.027 to 16,470 | 114 to 37,200 | |
| Test Range – Package | cc/(pkg × day) | 0.00025 to 144 | 1.0 to 323 |
| Resolution | cc/(m2 × day) | 0.05 | 2.0 |
| Repeatability | cc/(m2 × day) | 0.05 or 1.5%* | 25 or 1%* |
| Test Temperature Range | °C | 10° to 40°C ± 0.2°C | 10° to 35°C ± 0.2°C |
| Controlled RH Testing Range | % RH | 0 to 90% ± 3% | 0% |
*whichever is greater
Capabilities – All Models
| OX-TRAN 2/12 Series | Units |
| Film Size | 4” x 4” Std, 2”x2” optional |
| Film Thickness | Up to 120 Mil |
| Film Test Area | 50 cm2 cartridge std, |
| 5.6 cm2 cartridge optional |
Other Specifications (all models):
Physical Specifications
- 5.5” H x 12” W x 23” D (39.4 cm x 30.4 cm x 58.0 cm)
- 95 Lbs. (43.1 kg)
Electrical Requirements
- Voltage: 100 – 240 VAC 50/60 Hz
- Maximum Power Draw: 700 VA
Laboratory Requirements
| Temperature | Operation | 22 °C ± 2 °C |
| Storage | 10 °C to 30 °C | |
| Humidity | Operation | 20% to 80% RH (non-condensing) |
| Storage | 5% to 85% RH (non-condensing) |
Gas Supply Requirements
| Carrier Gas | Gas Composition | 100% Nitrogen |
| Supply Pressure, Nominal | 29 PSI, (2.0 Bar), (200 kPa) | |
| Test Gas | Gas Composition | 100% Oxygen (purity 99.9%) |
| Supply Pressure, Nominal | 29 PSI, (2.0 Bar), (200 kPa) |
Connectivity
- Remote Access and Control (requires optional Perm-Net Light software)
- Standard Ethernet port (100T)
- Dual USB 2.0 ports (for connection of keyboard, mouse or memory devices)
Compliance Standards
This product is UL and CSA listed using the ETL mark from Intertek Group plc. and is certified to conform to CE.
Conforms to the following internationally recognized safety standards.
- IEC 61010-1:2010 Third Edition
- UL 61010-1:2012 Third Edition
- CAN/CSA-C22.2 No. 61010-1:2012 Third Edition
Conforms to the following internationally recognized EMC standards.
- EN 61326-1:2013
- EN 61000-3-2:2006, A1:2009, A2:2009
- EN 61000-3-3:2013
Conforms to EU Directive 2011/65/EU RoHS Compliance.
Packaging Films
- Monolayer
- Multi-layer
- Coated Films
- Coated Paper/paperboard
Specialty Films
- Gel/lotions
Packages
- Common food packages
- Medical packages
- Bottles/Closures
Test Standard Compliance
ASTM F2622
ISO CD 15105-2
JIS K-7126-B
DIN 53380-3
Test Methodology
Following ASTM F2622
Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and
Sheeting Using Various Sensors
The oxygen gas transmission rate is determined after the sample has equilibrated in a controlled test environment. Control of carrier gas flow rate (for concentration detectors), relative humidity, temperature, and oxygen concentration in both the carrier gas and permeant (test) gas chambers is critical.
The specimen is mounted as a sealed semi-barrier between two chambers at ambient atmospheric pressure. A stream of nitrogen slowly purges one chamber and the other chamber contains oxygen. As oxygen gas permeates through the film into the nitrogen carrier gas, it is transported to the detector where it produces a signal representing the oxygen transmission rate.
DATA SHEET
RDM TEST BROCHURE
MEDESEAL BROCHURE